For the sixth consecutive time, and the 17th overall, Lanham, Maryland-based Hargrove, Inc. was selected as the official general services contractor for the Presidential Inaugural Committee, from January 20-21, 2013 at Washington, DC venues including the Walter E. Washington Convention Center and National Building Museum. For Obama's second inauguration, the trade show, exhibit, and event production company worked on the two official balls from the Presidential Inaugural Committee, the committee's candlelight dinner at the National Building Museum, the Kids Inaugural, the official parade floats, nine unofficial events, and the large volume of signage related to the inaugural activities. Hargrove managed an extensive variety of responsibilities including design, fabrication and production as well as management of all technical services (lighting, sound and video). And, nearly 43,000 square feet of the displays they created were finished using Esko′s digital finishing solution: the i-cut Suite layout software and the Kongsberg i-XL24 finishing system.

As one of the leading event, trade show and exhibit companies in the U.S., Hargrove has played a role in each inaugural since President Harry S. Truman’s second inaugural in 1949 and has served as the official general contractor since

President Bill Clinton’s first inaugural in 1993. Hargrove is one of the top 12 event companies in the U.S., serving more than 1,000 tradeshows, events and exhibits each year.

“We created about 78,000 square feet of graphics that covered various stages and floats, printing different designs on a Vutek GS3200, a Scitex XLJET 1500 and a Roland SOLJET PRO4 XR-640,” comments Rush Zbir, Hargrove director of the graphics department. “More than half of them were sent to Esko′s Kongsberg table – everything from flat Presidential seals to 3D seals, logos, and cut-out shapes.

The biggest challenge? Hargrove did not have a signed contract until just before Christmas. It takes almost 3,000 man-hours to build eight floats. This year they had 20 days to put everything together, with close to 60,000 man hours. The turnaround time was even more significant when you consider that the company was also involved with eight other major projects and 75 regular projects, including a major corporate project and auto trade show. “We started ‘swinging a hammer’ just three weeks before all these materials were due,” notes Zbir. “We worked straight to the event. All 250 full-time employees get involved in the project, along with 70 temporary workers hired specifically to work on the inauguration. Our graphics department ran three shifts 24/7. Sixteen people were working seven days a week, and as many as 15 hours a day.

“We used more than 60,000 feet of lumber. We fabricated the wall and trim structures, and all of the ancillary design items for ballrooms. Most were finished using the one Kongsberg table,” adds David Flanery, Director of fabrications.

“Back in the day, we printed and cut all the materials by hand. We had 25 people on the floor manually putting printed vinyl materials onto the substrate and measuring how to get it cut. Now, without our Kongsberg table, we would have needed much more manpower. We’d have to employ twice as many temporary staff just to get the graphics produced,” says Aaron Capp, senior operator. “Our Kongsberg i-XL24 is the backbone of the graphics department. Everything has to be finished, and most pieces need a custom cut. They’re rarely square. We could not have gotten the job done without the system.”